EN - 18
Problem Possible causes Solution
All buttons ash
simultaneously.
Hydraulic circuit error. Make sure there is water
in the tank and wait for the
circuit to reset. The machine
automatically returns to
its initial position. If the
problem persists, contact an
authorised service centre.
Milk drink not
dispensing.
Milk missing Insert milk in the container
and connect the tube. Make
sure the tube (24) and its
respective connector are
well immersed inside the milk
kettle.
Tube (24) not correctly
hooked to the coffee
dispenser (16)
Check correct assembly of
the components, consult
paragraph “Assembly of the
milk tube”.
Missing water in the tank. Fill the tank.
Milk system not positioned
correctly.
Check correct assembly of
the components, consult the
paragraph “Assembly of the
milk tube”.
Circuit clogged due to the
presence of limescale.
Perform the descaling
cycle, as indicated in the
“Descaling” paragraph.
Clogged components. Perform an automatic or
manual cleaning of the circuit
components and milk system.
Paragraph “Cleaning and
maintenance”.
To Next Page
Loading...
Need help?
General
