Smeg CMS6451X - Built-In Installation

10
BUILTIN INSTALLATION
Verify the minimum measurements required for correct instal-
lation of the appliance.
The coee maker must be installed in a column and the column
must be rmly xed to the wall with commercially available
brackets.
Important:

be performed with the appliance disconnected from the
mains electricity supply.

be heat resistant (65°C min).

of the cabinet (see measurements in gure).
45 mm
45 mm
45 mm
45 mm
450
850 mm
500 mm
550 mm Min.
560 mm
200 cm
2
455 mm
595 mm
22 mm
361 mm
528 mm
372 mm
15 mm
200 cm
2
45 mm
45 mm
45 mm
45 mm