Smeg CX51VE - User Manual

SERVICE MANUAL
FREE-STANDING
COOKERS
SMEG
Issuing date: 26/06/03
Summary
Service Manual
2. Presentation of the range
2.1. 60x50 cm models
2.2. 60x60 cm models
2.3. 80x50 cm models
2.4. 90x60 cm models
2.5. Semi-professional models
3. Constructive principles
3.1. Cooling tangential system
4. Front panel controls description
4.1 60x50, 60x60, 80x50, 90x60 COOKERS
4.2 100x60 COOKERS
5. Function legend
6. Programmers & Clocks
6.1. Electronic programmer with 5 buttons
6.1.1 Functions list
6.1.2 Time Regulation
6.1.3 Semi automatic Cooking
6.1.4 Automatic Cooking
6.1.5 End of cooking
6.1.6 Adjusting alarm volume
6.1.7 Switching off the alarm
6.1.8 Minute counter
6.1.9 Cancellation of data settings
6.1.10 Modifying data settings
6.2. Digital counter minute with 3 buttons
6.2.1 Functions list
6.2.2 Time adjusting
6.2.3 Setting of the counter minute
6.2.4 Alarm disconnection
6.2.5 Adjusting the alarm volume
6.2.6 Modifying the dat settings
6.3. Analogic clock
7. Temperature check
1

Summary

Presentation of Smeg Cooker Range

60 x50 cm Models

60 x60 cm Models

80 x50 cm Models

90 x60 cm Models

Semi-professional Models

Front Panel Controls Description

60 x50, 60 x60, 80 x50, 90 x60 Cookers

Details the function of HOB burner control knobs and oven thermostat/function knobs.

100 x60 Cookers

Describes HOB burner controls and MAXI oven thermostat/function knobs for 100x60 cm models.

Function Legend

Oven Cooking Function Symbols

Programmers and Clocks

Electronic Programmer with 5 Buttons

Details functions, time regulation, automatic cooking, alarm settings, and minute counter operations.

Digital Counter Minute with 3 Buttons

Temperature Check Procedures

Frontal Temperature Check

Component and Surface Temperatures

External Accessible Surface Temperatures

Provides temperature limits for metal, enamel, glass, and plastic frontal/lateral and door surfaces.

Thermostat Correspondence Check

Verifies correspondence between thermostat serigraphy and actual oven center temperature.

Accessing Internal Appliance Parts

Free-standing Cookers Access

Semi-professional Cookers Access

Component Replacement and Adjustment

Primary Air Minimum Adjustment

Guides on adjusting the oven burner's minimum level and cooking burner's hob minimum level.

Troubleshooting Common Issues

Hob;Oven Burner Flame Issues

Addresses flame switching off or not staying on due to thermocouples, pressure, or magneto faults.

Anomalous or Unstable Burner Flame

Troubleshooting unstable flames caused by airflow, impurities, or gas pressure issues.

Cracked Enamel Near Burner Cups

Noisy Burner Operation

High Frontal Outside Temperatures

Troubleshoots high frontal temperatures by checking oven temperature and cooling fan function.

Safety Thermostat Intervention

Addresses safety thermostat activation due to overheating or incorrect positioning.

Cooking Uniformity Issues

Solves uneven cooking problems by checking thermostat, fan calibration, heating elements, and insulation.

Oven Does Not Heat

Diagnoses heating failures by checking thermostat, heating elements, connections, and safety thermostat.

Position and Set of Contact Thermostats

60 x50 Single Oven Thermostats

60 x60 Single Oven Thermostats

80 x50 Oven Thermostats

90 x60 Oven Thermostats

70, 90, 100 cm Oven Thermostats

Smeg CX51VE Specifications

General

Appliance placement	Freestanding
Number of Ovens	1
Width	50 cm
Energy Rating	A
Control type	Mechanical
Depth	60 cm
Material	Stainless Steel
Safety Features	Flame failure device
Dimensions (WxDxH)	500 x 600 x 850 mm