44
Description
2.3 Description of controls (Fig. B)
ON/OFF button (17)
Dispense button. When the button is
pressed, the machine starts brewing coffee
according to the pre-set functions. You can
stop brewing coffee at any time by pressing
the button again.
Aroma button (18)
Pressing the button allows you to select
between Delicate and Intense Aroma.
The intensity selection will be shown on the
display: one bean for Delicate Aroma, or
two beans for Intense Aroma.
The aroma setting is maintained
for subsequent brewing cycles.
4-Cup button (19)
This button allows you to brew a small
amount of coffee, corresponding to
approximately 4 cups.
To activate the 4-cup function, see section
“4 cups function”.
Autostart button (20)
This button allows the appliance to be
programmed to switch on automatically to
prepare drip coffee at a time selected by
the user.
To set, activate and use this function, see the
section “Autostart function”.
Time / timer setting lever (9)
The lever at the side allows you to select
and set the machine settings such as:
• setting the time
2 Appliance description
(Fig. A)
1) Lid
2) Tab
3) Water tank (1.4 litres)
4) Filter holder
5) Anti-drip valve
6) Permanent filter
7) Boiler outlet
8) Control panel and display
9) Time / timer setting lever
10) Jug lid
11) Jug (10 cups)
12) Jug handle
13) Water tank level indicator (max. 1.4
litres)
14) Scoop
15) Keep Warm plate
16) Base and non-slip feet
2.1 Identification plate
The identification plate bears the technical
data, serial number and brand name of the
appliance.
Do not remove the identification plate for
any reason.
2.2 Before first use
• Carefully unpack the appliance, remove
all packaging materials and remove the
label from the display.
• Thoroughly wash and dry the components
of the drip coffee machine (see section
“4 Cleaning and maintenance”).
Before use, make sure that all
components are intact and that
there are no cracks
To Next Page
Loading...
Need help?
General
Weight and Dimensions
