Smeg DD409S - End Program; Interruption of a Program; To Change a Program

21
END PROGRAM
When the program finishes, a buzzer sounds
briefly and all the
PHASES/PROGRAM
lights
(7)
flash.
Press any of the
SELECTION PROGRAMS
buttons
(2)
, stops the light
flashins, and the dishwasher is now ready to perform a new cycle;
opening and shutting the door or switching the appliance off and on has
the same effect.
INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
•
press one of the
SELECTION PROGRAMS
buttons
(2);
•
keep the button pressed until the
PROGRAM PHASES
lights
(7)
come on (confirmation buzzer);
•
start the program (see “
S
TART PROGRAM
”).
TO CHANGE A PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see “
I
NTERRUPTION OF A PROGRAM
”);
•
select the new program;
•
start the new program (see “
S
TART PROGRAM
”).
User instructions