User instructions
14
PROGRAMS TABLE
DURATION
CONSUMPTION
PROGRAMME
NUMBER
& SYMBOL
LOAD CROCKERY AND
CUTLERY
PROGRAM
PROGRESS
MINUTES
(1)
WATER
LITRES
(2)
POWER
KWh (1)
1 SOAK
Pans and dishes awaiting
completion of the load
Cold prewash
15'*** 3,5 0,02
2 GLASS
Glass, china and mixed
dishes with light dirt.
Wash at 45°C
Cold rinse
Rinse at 70°C
Dry
65'***
9,5 1,10
3 ECO (*)
EN 50242
Dishes with normal dirt,
even with dried-on
residues
Cold prewash
Wash at 50°C
Cold rinse
Rinse at 55°C
Dry
175’
** **
4 NORMAL
IEC/DIN****
Dishes with normal dirt,
even with dried-on
residues
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry
105’***
13,5 1,35
5 ULTRA
CLEAN
*****
Very dirty pans and
dishes, even with dried-on
residues.
Hot prewash
Wash at 70°C
Cold rinse (3)
Rinse at 70°C
Dry
160'***
15,5 1,70
Only run the soak program with partial loads.
*
Reference program as per EN 50242 standard, with ENERSAVE option selected.
(**) See energy label. (***) For 3 digit models, see display.
****
Reference program IEC/DIN standard, with ENERSAVE option selected.
*****
Reference program for laboratories: Detergent: 20g in the dispenser + 10g in the
door or tablet. Configuration: see photo in “Using the baskets”.
The ULTRA CLEAN program terminate with an extra anti-bacteria rinse that ensures a
further reduction in the bacteria level. If the temperature falls during this stage of the
program (e.g. because the door is opened or due to a power blackout), the program
lights flash to warn that the anti-bacteria effect is not guaranteed.
(1) The cycle duration and power consumption may vary according to the water and
room temperatures, and the type and amount of dishes.
(2)
Average power consumption with the softener set on level 2.
(3) 1 or 2 cold rinses depending on the model.
If the dishwasher door is open or not properly closed, the washing cycle
will not start.
To Next Page
Loading...
