User instructions
1.3 Washing programs
The dishwasher is equipped with a control panel and an
INFORMATION
DISPLAY (9)
from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
• The water supply tap is
open.
• The
correct amount of detergent
has been added to the
dispenser
.
• The baskets have been
correctly loaded.
• The spray arms are able to
rotate freely
and without
obstruction.
• The dishwasher door is
securely closed
.
LIGHTING
Pressing the
ON/OFF
button
(1)
will start the dishwasher and will lit up
the dishwasher pilot light
(7)
. After approximately
3 second
from this
operation the
DISPLAY (9)
will be turned on with a visualization that will
depend upon the state of the dishwasher.
To Next Page
Loading...
