User instructions
HALF LOAD WASH FUNCTION (on some models only)
This function is recommended for loads of up to
7 place-settings
, and
cuts down on the use of water and electricity.
By pressing the
½ LOAD WASH (3)
button it is possible to select only
one basket washing (upper or lower).
After having the program selected, continue as follows:
• by pressing for one time the
½ LOAD
WASH (3)
button, it will select the upper
basket and on the display will compare the
following visualization;
• by pressing the
½ LOAD WASH (3)
button
again the lower basket is selected;
• by pressing a third time the
½ LOAD WASH (3)
button it will bring
back to the full load washing mode.
One half of the cutlery basket can be placed in the
½ LOAD
program
basket.
WARNING: do not load dishes and cutlery into the non-selected
basket, because the water spray will only reach the selected basket.
To Next Page
Loading...
