Smeg ECF01 User Manual

Use
17
ENITEN
Setting the auto shut-off time
For energy saving reasons, the espresso
machine is equipped with an auto shut-off
feature that activates when the machine has
been left on for a long time.
To set the auto shut-off time:
1. Access the programming menu.
2. Press the button to select the auto
shut-off time. The lights of the current
setting will turn on:
3. The lights will start flashing in sequence.
4. Press the button corresponding to the
time you want to set, choosing from 9
minutes , 30 minutes or 3
hours .
5. The button will flash to indicate the
selection has been saved.
Restoring the factory settings
To restore factory settings:
1. Access the programming menu.
2. Turn the steam valve to the position.
3. Press the button: the three lights will
blink to indicate that the original settings
have been restored.
4. Turn the steam valve back to the
position.
Lights Time setting
9 minutes
30 minutes
3 hours

Smeg ECF01 Specifications

General

Steam pipe	Yes
Product type	Espresso machine
Built-in grinder	No
Capacity in cups	2 cups
Number of spouts	2
Coffee input type	Ground coffee
Coffee maker type	Semi-auto
Country of origin	China
Appliance placement	Countertop
Water tank capacity	1 L
Adjustable coffee strength	-
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Cord length	1 m
Control type	Buttons, Lever
Product color	Black
Housing material	Plastic, Stainless steel
AC input voltage	220–240 V
AC input frequency	50 - 60 Hz
Pump pressure	- bar
Package depth	410 mm
Package width	230 mm
Package height	420 mm
Package weight	6700 g
Quantity per pack	1 pc(s)
Pallet weight	212600 g
Quantity per pallet	28 pc(s)
Pallet GTIN (EAN/UPC)	8017709229924
Quantity per pallet layer	7 pc(s)
Number of layers per pallet	4 pc(s)
Pallet net width	800 mm
Pallet net height	1811 mm
Pallet net length	1200 mm
Pallet net weight	131600 g

Weight and Dimensions

Depth	329 mm
Width	149 mm
Height	330 mm
Weight	4700 g