Important Safeguards
6
For this appliance
• Always unplug the espresso machine if
left unattended, before assembly and
disassembly of components and before
cleaning.
• Unplug the espresso machine from the
outlet when it is not in operation, before
cleaning and in case of malfunction.
• Allow the espresso machine to cool
before cleaning.
• Do not use the espresso machine without
water in the tank or without the tank.
• Leave at least 1 inch of space between
the espresso machine and any side or
rear surface, and at least 6 inches of
space above the espresso machine.
• Risk of scalding! The espresso machine
generates heat and produces hot water
and steam during operation.
• Risk of scalding! Do not touch the cup
warmer tray during operation.
• Do not use the espresso machine in
combination with parts or accessories
from other manufacturers.
• Use only original spare parts from the
manufacturer. The use of spare parts not
recommended by the manufacturer may
cause fire, electric shock or injury to
persons.
• Place the espresso machine on a flat, dry
surface.
• Avoid wetting or spraying liquid on the
espresso machine. In case of contact
with liquid, immediately unplug the cord
from the electrical outlet and dry
thoroughly: Risk of electric shock!
• Do not use abrasive cleaners or sharp
objects to clean the espresso machine.
• A short power cord is provided to
reduce risks resulting from becoming
entangled in or tripping over a longer
cord.
• Longer, detachable power supply cords
or extension cords are available and
may be used if care is exercised in their
use.
• If an extension cord is used, the marked
electrical rating should be at least as
great as the electrical rating of the
appliance. If the appliance is provided
with 3-wire, grounding type cord, the
extension should be a GROUNDING
TYPE 3 - WIRE CORD. The longer cord
should be arranged so that it will not
drape over the counter-top or table top
where it can be pulled on by children or
tripped over.
• Your product is equipped with a
polarized alternating current line plug (a
plug having one blade wider than the
other). This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the
plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
Weight and Dimensions
