Smeg FS18EV3HX - Transportation and Changing of Installation Position; Repositioning the Door; Before Calling Service

EN - 14 -
BEFORE CALLING SERVICE
TRANSPORTATION AND CHANGING OF INSTALLATION
POSITION
Repositioning the door
• It is not possible to change the opening direction of your fridge door, if the door
handle on your fridge is installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest authorised service agent to have the opening direction changed.
Transportation and changing of installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while
transporting.
• Before transporting or changing the
installation position, all the moving objects
(ie,shelves,crisper…) should be taken out
or fixed with bands in order to prevent them
from getting damaged.
Carry your fridge in the upright position.
If your fridge is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected ,
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your appliance performs poorly;
Check that;
• You have not overloaded the appliance ,
• The fridge temperature set to 2.