Instructions for the Installer
7
It is important to follow these instructions before and during the oven installation:
• Decide the final location of the oven. Locate exsisting wiring to avoid drilling into or severing wiring
during installation.
• To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any
portion of the frame or trim for lifting.
• Remove the shipping materials and tape from the oven.
• Remove the literature contained in the package.
• Remove and set aside racks and other parts from inside the oven.
• Move oven and cardboard close to the oven’s final location.
• Remove oven door (see paragraph “8.2 Removing the door” in the Instruction for the User booklet)
IMPORTANT: Use both hands to remove the oven door.
To Next Page
Loading...
