EN
12
3. DESCRIPTION OF CONTROLS
3.1 CONTROL PANEL
All the appliance's control and monitoring devices are placed together on the front panel.
For switching the washer-dryer
on and off and selecting pro-
grammes. Can be turned in ei-
ther direction. Does not turn
while programmes are in pro-
gress.
:
For starting and stopping
working cycles.
: shows the settings (spin speed, cycle status, flexi time, maximum recommended weight,
drying levels, child lock, clean programme, time drying and automatic drying levels). The settings
can be modified using the buttons underneath.
Buttons (from left to right):
Washing Temperature selection
Spin speed selection
Option selection
Confirm option
Time to end
Drying
To Next Page
Loading...
