What to do if the Smeg LSTA147SSA Washer/Dryer is not pumping out water?
- LlwallaceAug 19, 2025
If your Smeg Washer/Dryer isn't pumping out water, check that the drain hose is not kinked and the drain pump is not fouled.
What to do if the Smeg LSTA147SSA Washer/Dryer is not pumping out water?
If your Smeg Washer/Dryer isn't pumping out water, check that the drain hose is not kinked and the drain pump is not fouled.
How to reduce strong vibrations during spins in my Smeg Washer/Dryer?
To reduce strong vibrations during spins with your Smeg Washer/Dryer, verify that the appliance is properly leveled, that the washer-dryer is not too close to walls or kitchen units, and that the internal unit on flexible mounts is locked in position.
Why is my Smeg LSTA147SSA not drying laundry?
If your Smeg Washer/Dryer is not drying laundry, check that the water tap is turned on, the load of laundry is not excessive, the drying time is long enough, and the appropriate drying time is selected.
Why Smeg LSTA147SSA Washer/Dryer does not spin?
Your Smeg Washer/Dryer may not spin because the anti-imbalance safety device has tripped, as the laundry is not evenly distributed in the drum. If the laundry is still wet at the end of the cycle, rearrange it in the drum by hand and repeat the spin programme only.
Why is my laundry not properly spun in Smeg LSTA147SSA?
If your laundry is not properly spun in your Smeg Washer/Dryer, it may be because large items are screwed up and not evenly distributed within the drum. Always wash a mix of large and small items.
How to fix a Smeg LSTA147SSA Washer/Dryer that won't start?
If your Smeg Washer/Dryer isn't starting, make sure the plug is properly connected to the socket, the door is securely closed, and the 'Start/Pause' button has been pressed.
What to do if my Smeg Washer/Dryer is leaking water on the floor?
If you find water on the floor near your Smeg Washer/Dryer, check that the water intake hose fittings are not loose and the end of the drain hose is correctly positioned.
Why is my Smeg LSTA147SSA not filling with water?
If your Smeg Washer/Dryer isn't filling with water, check that the plug is properly connected to the socket, the door is securely closed, the water tap is turned on, the water intake hose filters are not fouled, and the water intake hose is not trapped or kinked.
Why is there too much foam in my Smeg Washer/Dryer?
If too much foam is forming in the tank and flowing out of the drawer of your Smeg Washer/Dryer, check that the detergent used is recommended for automatic washing machines and not for hand washing, and that the quantity used is as stated in the manual and no more.
Why are the washing results unsatisfactory with my Smeg LSTA147SSA Washer/Dryer?
Unsatisfactory washing results with your Smeg Washer/Dryer are probably due to too little or unsuitable detergent, difficult stains not pre-treated, incorrect temperature settings, or an overloaded basket.
Brand | Smeg |
---|---|
Model | LSTA147SSA |
Category | Washer/Dryer |
Language | English |
Proper disposal of packaging materials to prevent hazards and environmental impact.
Guidelines for rendering old appliances unusable and responsible disposal at end-of-life.
Tips for efficient usage, load size, detergent, and spin speed for environmental benefit.
Crucial safety guidelines for installation, use, and general operation of the appliance.
Instructions for disconnecting the appliance and leaving the door ajar during extended periods of non-use.
Step-by-step guide for safely replacing the fuse in the appliance's power plug.
Step-by-step guide on how to safely unpack the washer-dryer and remove transport fittings.
Detailed instructions for correctly positioning and levelling the appliance for optimal performance.
Guide on connecting the appliance to the cold and hot water supply hoses, including pressure checks.
Instructions for correctly connecting the drain hose to a drain pipe or sink to ensure proper water drainage.
Steps for ensuring a safe and compliant electrical connection to the mains power supply.
Overview of the appliance's control panel, including display, buttons, and programme selector.
Guidance on sorting laundry by fabric type, colour, and understanding washing symbols.
Instructions on how to safely open the appliance door, including a safety delay feature.
Advice on determining appropriate laundry load sizes for optimal washing results and efficiency.
Tips for correctly loading laundry into the drum, ensuring even distribution and avoiding overloading.
Guidance on using the detergent drawer, including powder, liquid, and fabric conditioner placement.
Instructions on how to dose powder detergent for normal and very dirty laundry.
Guidelines for using liquid detergents, including dosage and placement in the drawer or drum.
Instructions for adding descalers to the detergent compartments as recommended.
Reference to the "Programmes Table" for advice on selecting programmes based on fabric type.
Step-by-step guide to switch on the appliance and select the desired washing programme.
Explanation of how to select and confirm various washing options like Prewash, Intensive, Easy Iron, etc.
How to set a delayed start time for the washing programme and how the display indicates it.
Instructions on how to start the selected washing programme and what the display shows during operation.
Procedures for interrupting, changing, or restarting a washing programme in progress.
How the appliance indicates programme completion and steps for unloading and shutting down.
How to activate and deactivate the child lock feature to prevent unintended operation.
Procedure for opening the door in case of a power failure or emergency.
General advice on using the drying function, suitable fabrics, and load limits.
Instructions for setting up combined wash and dry cycles, including load limits.
Explains display messages related to inappropriate load sizes (too low or too high) during drying.
How to set and use programmes for drying laundry only, including load recommendations.
Procedures for interrupting or changing a drying programme, including cooling the load.
Instructions for running the CLEAN programme to maintain the drying circuit and remove fluff.
How to clean the exterior surfaces of the appliance safely and effectively.
Methods for removing rust marks and descaling the washing machine drum.
Advice on regularly checking the door gasket for foreign objects.
Step-by-step guide to clean the drain pump if it becomes blocked.
Instructions for removing and cleaning the detergent drawer and siphon.
Guide on how to clean the intake filters if the appliance is not taking in enough water.
Explains common error codes displayed by the appliance and their meanings.
Specifies the minimum dimensions required for the cabinet to house the washing machine.
Instructions for attaching the decorative front panel to the appliance door.
Guidance on using a template for marking and drilling holes for panel attachment.
Steps for drilling holes and fixing panel elements, hinges, and locks.
How to adjust the door hinges to ensure the panel is aligned correctly.
Steps for placing the washing machine into the cabinet and ensuring proper clearance.
Instructions for fitting the baseboard to the cabinet, ensuring access for maintenance.