How to fix a Smeg Washer/Dryer that won't start?
If your Smeg Washer/Dryer isn't starting, make sure the plug is properly connected to the socket, the door is securely closed, and the “Start/Pause” button has been pressed.
Why is my Smeg WDI12C7 not filling with water?
If your Smeg Washer/Dryer isn't filling with water, check that the plug is properly connected to the socket, the door is securely closed, the water tap is turned on, the water intake hose filters aren't fouled, and the water intake hose isn't trapped or kinked.
Why is my Smeg WDI12C7 not drying laundry?
If your laundry isn't drying in your Smeg Washer/Dryer, make sure the water tap is turned on, the load of laundry isn't excessive, the drying time is long enough, and the appropriate drying time is selected.
What to do if water is not pumping out of my Smeg Washer/Dryer?
If water isn't pumping out of your Smeg Washer/Dryer, check that the drain hose isn't kinked and the drain pump isn't fouled.
Why does my Smeg Washer/Dryer not spin?
If your Smeg Washer/Dryer isn't spinning, it may be because the anti-imbalance safety device tripped due to laundry not being evenly distributed in the drum. If laundry is still wet at the end of the cycle, rearrange it in the drum by hand and repeat the spin programme only.
What to do if my Smeg WDI12C7 Washer/Dryer is leaking water on the floor?
If you find water on the floor near your Smeg Washer/Dryer, check that the water intake hose fittings are not loose and that the end of the drain hose is correctly positioned.
How to reduce strong vibrations during spins of my Smeg Washer/Dryer?
To reduce strong vibrations during spins with your Smeg Washer/Dryer, check that the appliance is properly leveled, the washer-dryer isn't too close to walls or kitchen units, and the internal unit on flexible mounts is locked in position.
Why are the washing results from my Smeg Washer/Dryer unsatisfactory?
Unsatisfactory washing results from your Smeg Washer/Dryer may be due to too little or unsuitable detergent, difficult stains not dealt with before washing, the incorrect temperature setting, or an overloaded basket.
Why is there too much foam in my Smeg Washer/Dryer?
If there's too much foam in your Smeg Washer/Dryer, ensure the detergent used is recommended for automatic washing machines and not for hand washing, and that the quantity used is as stated in the manual and no more.
Why is my laundry not properly spun in my Smeg WDI12C7 Washer/Dryer?
If your laundry isn't properly spun in your Smeg Washer/Dryer, it could be because large items are screwed up and not evenly distributed within the drum. Always wash a mix of large and small items.
General| Brand | Smeg |
|---|---|
| Model | WDI12C7 |
| Category | Washer/Dryer |
| Language | English |
Crucial safety guidelines for installation, use, and electrical connections.
Step-by-step guide for replacing the fuse in the appliance's plug.
Details on electrical system requirements and safe connection procedures for the UK.
Steps to safely unpack the washer-dryer, removing transport fittings.
Guidance on placing and levelling the appliance correctly for stable operation.
Instructions for connecting the cold and hot water supply hoses.
Steps for correctly connecting the drain hose to a sink or drain pipe.
Details on electrical system requirements and safe connection procedures.
Details on available wash options like Prewash, Intensive, Easy Iron, etc.
Setting up automatic wash and dry cycles, including load limits.
How to use the dryer function independently of washing.
A table listing common problems and their solutions.
Explanation of error codes displayed on the appliance.
Instructions for attaching a front panel to the washing machine door.
Steps for attaching panel elements and securing the panel.
To Next Page
