6
impossible to touch live components and a tool must be
required to remove it.
Our company declines all liability for failure to observe the
above safety requirement.
Applying the
baseboard
It must be possible to remove the continuous kitchen baseboard
to allow the drain pump to be cleaned if necessary.
In some cases, the baseboard is not continuous but limited to
the width of the washing machine. In this case, the kitchen
baseboard can be fixed to the washing machine baseboard with
4 screws, respecting the 4 reference marks (see fig. 9-10-11).
When applying the kitchen baseboard, the washing ma-
chine baseboard may not be removed or adapted as, for
reasons of safety, it must remain as it is, in one piece and
fixed to the washing machine.
To Next Page
Loading...
