Smeg PGF64 - User Manual

21
Contents
THESE INSTRUCTIONS ARE VALID ONLY FOR THE DESTINATION COUNTRIES
WHOSE IDENTIFYING SYMBOLS ARE INCLUDED ON THE COVER OF THIS MAN-
UAL.
INSTRUCTIONS FOR THE USER: these instructions contain user
recommendations, a description of the controls and the correct
procedures for cleaning and maintenance of the appliance.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified
technician who must install the appliance, set it functioning and carry out
an inspection test.
1. INSTRUCTIONS FOR USE .............................................................. 22
2. SAFETY PRECAUTIONS ................................................................. 24
3. ENVIRONMENTAL RESPONSIBILITY ............................................. 26
4. USING THE HOB.............................................................................. 27
5. CLEANING AND MAINTENANCE.................................................... 29
6. POSITION NEAR THE COUNTER TOP ......................................... 30
7. ADAPTATION TO DIFFERENT TYPES OF GAS ............................ 36
8. FINAL OPERATIONS ....................................................................... 38

Summary

Instructions for Use and Safety

Usage Safety Guidelines

Ensure control knobs are always set to the 'off' position after use.

Safety Precautions

Professional Installation and Servicing

Mandate for qualified personnel for installation and servicing.

Power Connection Safety

Verify power grid data, ensure proper earthing, and avoid pulling the cable.

Appliance Usage Restrictions

Keep children away, avoid inserting metal objects, and do not use steam jets.

Using the Hob

Lighting the Hob Burners

Step-by-step guide to safely ignite the hob burners.

Cleaning and Maintenance

Safety Precautions for Cleaning

Essential safety measures before and during appliance cleaning operations.

Cleaning Hob Components

Installation: Positioning and Structure

Fixing to Traditional Casing

Fixing to Electric Model Structure

Electrical Connection

Power Line and Socket Compatibility

Earthing and Circuit Breaker Safety

Mandatory earthing and installation of an accessible omnipolar circuit breaker for safety.

Gas Connection and Adaptation

Gas Supply Connection Methods

Gas Leak Testing

Leak testing of gas hose fittings with soapy solution after connection.

Adaptation to Different Gas Types

Nozzle Replacement Procedure

Steps for replacing burner nozzles to adapt the appliance for different gas types.

Smeg PGF64 Specifications

General

Type	Gas hob
Width	60 cm
Number of Burners	4
Material	Stainless steel
Controls	Knobs
Safety Features	Flame failure device
Ignition	Electronic
Burner Types	Rapid, Semi-rapid, Auxiliary
Gas Type	Natural gas