Smeg Gas Cooktop PGF75-2 User Manual

Summary
1 INSTRUCTIONS FOR SAFE AND PROPER USE_______________ 20
2 POSITIONING OF THE HOB _______________________________ 22
3 ADJUSTMENT TO DIFFERENT TYPES OF GAS_______________ 29
4 FINAL OPERATIONS_____________________________________ 31
5 USING THE HOB ________________________________________ 32
6 CLEANING AND MAINTENANCE ___________________________ 34
THESE INSTRUCTIONS ARE VALID ONLY FOR END USER COUNTRIES WHOSE
IDENTIFICATION SYMBOLS APPEAR ON THE COVER OF THIS MANUAL.
INSTRUCTIONS FOR THE INSTALLER: these are for the qualified
technician who must carry out a suitable check of the gas system,
install the appliance, set it functioning and carry out an inspection test.
INSTRUCTIONS FOR THE USER : these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.
19

Smeg Gas Cooktop PGF75-2 Specifications

General

Brand	Smeg
Model	Gas Cooktop PGF75-2
Category	Hob
Language	English

Summary

Instructions for Safe and Proper Use

Positioning of the Hob

Attachment to Support Structure (Built-in Model)

Details on attaching the hob to the support structure for a traditional built-in installation.

Attachment to Support Structure (Flush-Mounting Model)

Procedure for attaching the hob to the support structure for a flush-mounting installation.

Electrical Connection

Details on connecting the appliance to the power supply, including cable specifications and safety requirements.

Ventilation Requirements

Information on necessary ventilation for the room where the appliance is installed.

Discharge of Combustion Products

Requirements for discharging combustion products, including flue and aspiration systems.

Gas Connection

Instructions for connecting the appliance to the gas mains using copper or flexible steel pipes.

Connection to LPG

Guidance on connecting the appliance to an LPG tank using a pressure regulator.

Adjustment to Different Types of Gas

Replacement of Nozzles on the Hob

Step-by-step guide for replacing burner nozzles to adapt the hob for different gas types.

Arrangement of Burners on Cooking Hob

Diagram showing the layout and types of burners on the cooking hob.

Final Operations

Regulation of Minimum Flame (Town Gas/Natural Gas)

Procedure for adjusting the minimum flame setting for town gas and natural gas.

Regulation of Minimum Flame (LPG)

Procedure for adjusting the minimum flame setting for LPG.

Lubrication of Gas Taps

Instructions for lubricating gas taps, to be performed by an authorized person.

Using the Hob

Ignition of the Burners

Instructions on how to ignite the hob burners, including electronic ignition and safety valve operation.

Practical Advice for Using the Burners

Tips for better burner use, lower gas consumption, and safe cooking practices.

Diameter of Receptacles

Recommended minimum and maximum diameters for pots and pans used on the hob.

Cleaning and Maintenance

Cleaning the Stainless Steel

Guidelines for cleaning and preserving stainless steel surfaces, including daily cleaning and stain removal.

Cleaning of Cooking Hob Components

Instructions for cleaning removable hob components like grids, caps, and burners.