Smeg PTS723-3 - User Manual

Table of Contents
3
1. Precautions for safety and use_________________________ 4
2. Fitting the appliance in the top _________________________ 5
2.1 Fixing to the supporting structure ________________________________________5
3. Electrical connection ________________________________ 7
4. Gas connection ____________________________________ 8
4.1 Bottled gas connection ________________________________________________9
4.2 Room ventilation_____________________________________________________9
4.3 Combustion gas discharge _____________________________________________9
5. Adapting to different types of gas______________________ 10
5.1 Removing the hob skin _______________________________________________10
5.2 Adjusting for bottled gas ______________________________________________11
5.3 Adjusting for town gas _______________________________________________11
5.4 Adjusting for natural gas______________________________________________11
5.5 Adjusting the primary air flow __________________________________________12
5.6 Reassembling the hob skin____________________________________________12
5.7 Adjusting the minimum setting for natural gas and town gas __________________12
5.8 Adjusting the minimum for bottled gas ___________________________________12
5.9 Hob burner layout ___________________________________________________13
5.10 Greasing the gas taps________________________________________________13
6. Description of controls ______________________________ 14
6.1 The front panel _____________________________________________________14
7. Using the hob _____________________________________ 15
7.1 Lighting burners with safety device______________________________________15
7.2 Positioning the griddle plate ___________________________________________15
7.3 Practical hints for using the burners _____________________________________15
7.4 Pan diameters______________________________________________________15
8. Cleaning and maintenance __________________________ 16
8.1 Cleaning stainless steel ______________________________________________16
8.2 Cleaning the components _____________________________________________16
THESE INSTRUCTIONS ONLY APPLY TO THE COUNTRIES OF DESTINATION WHOSE
IDENTIFICATION SYMBOLS ARE LISTED ON THE COVER OF THIS MANUAL.
THIS BUILT-IN HOB IS CLASSIFIED AS CLASS 3.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified
engineer who is to check the gas supply system and install, commission and test the
appliance.
INSTRUCTIONS FOR THE USER: these provide recommendations for use, a
description of the controls and the correct procedures for cleaning and maintaining the
appliance.

Summary

1. Precautions for safety and use

2. Fitting the appliance in the top

2.1 Fixing to the supporting structure

Details on how to fix the appliance to the supporting structure, including dimensions and clearances.

3. Electrical connection

4. Gas connection

4.1 Bottled gas connection

Instructions for connecting the appliance to bottled gas cylinders, including pressure regulator use.

4.2 Room ventilation

4.3 Combustion gas discharge

5. Adapting to different types of gas

5.2 Adjusting for bottled gas

Procedure for adjusting the appliance for bottled gas, including nozzle and air flow settings.

5.3 Adjusting for town gas

Procedure for adjusting the appliance for town gas, including nozzle and air flow settings.

5.4 Adjusting for natural gas

Procedure for adjusting the appliance for natural gas, including nozzle and air flow settings.

5.5 Adjusting the primary air flow

5.7 Adjusting the minimum setting for natural gas and town gas

5.8 Adjusting the minimum for bottled gas

7. Using the hob

7.1 Lighting burners with safety device

Instructions on how to light burners safely using the electronic ignition and safety device.

7.3 Practical hints for using the burners

Smeg PTS723-3 Specifications

General

Brand	Smeg
Model	PTS723-3
Category	Hob
Language	English