Smeg CIR597X - User Manual

Contents
1. INSTRUCTIONS FOR SAFE AND PROPER USE________________ 4
2. POSITIONING OF HOB ____________________________________ 6
3. GAS CONNECTION ______________________________________ 11
4. ELECTRICAL CONNECTION ______________________________ 12
5. ADAPTATION TO DIFFERENT TYPES OF GAS _______________ 13
6. FINAL OPERATIONS_____________________________________ 16
7. USING THE HOB ________________________________________ 17
8. LEANING AND MAINTENANCE ____________________________ 19
THESE INSTRUCTIONS ARE VALID ONLY FOR END USER COUNTRIES WHOSE
IDENTIFICATION SYMBOLS APPEAR ON THE COVER OF THIS MANUAL.
INSTRUCTIONS FOR THE INSTALLER: these are for the qualified
technician who must carry out a suitable check of the gas system,
install the appliance, set it functioning and carry out an inspection test.
INSTRUCTIONS FOR THE USER: these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.
3

Summary

Positioning of Hob

Attachment to support structure

Details on creating an opening for the hob installation, including minimum distances from the rear border.

Clearance above and around domestic appliances

Specifies required clearances above the hob for safe installation, considering overhead surfaces and ventilation.

Side clearances - (Measurements B & C)

Defines side clearance requirements for installation, including protection measures for combustible surfaces.

Gas Connection

Electrical Connection

Adaptation to Different Types of Gas

Removing the hob

Regulation for LPG

Procedure for adjusting gas flow and nozzle for LPG, including torque specifications.

Regulation for natural gas

Procedure for adjusting gas flow and nozzle for natural gas, referencing LPG adjustment steps.

Smeg CIR597X Specifications

General

Number of Cooking Zones/Burners	5
Width	90 cm
Power Levels	9
Finish	Stainless Steel
Material	Stainless steel
Type	Gas
Burner Types	Auxiliary
Gas Type	Natural Gas
Dimensions (WxD)	90 x 51 cm