Reference program (2 button models)
(*) Selector on
3
User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program (3 button models)
(*) Selector on
4
+
ECO 45°C
button
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting Depending on the model 3/4 or 4/6
AS/NZS 2007
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
HALF LOAD WASH SETTING
This function is especially suitable for loads up to
6
place settings
and allows saving of water and
electricity. It is controlled by the
HALF LOAD
button
(3)
(see section “3. Description of the
controls”) and allows washing in the upper basket
only.
To Next Page
Loading...
