Instructions for the user
29
NMKT péáí=ÅççâáåÖ=EÅÉêí~áå=ãçÇÉäë=çåäóF=
FUNCTION SWITCH
THERMOSTAT SELECTOR SWITCH FROM
50° TO 260°C
Place the rotisserie frame “B” on the second set of runners up from the
bottom and insert the rod “A” in the hole in the back of the oven, until the
spit “C” starts to turn.
Check that the right-hand end of the rod “C” is positioned as shown in
the diagram.
Make sure that the oven door is closed during cooking.
It is normal for the thermostat light to flash during cooking. This indicates
the temperature inside the oven is regular.
=
To Next Page
Loading...
