12
4 / USING YOUR APPLIANCE
EN
•
How to set the time
--
When supplied with electricity
The display flashes at 12:00 (fig.1)
Set the time by pressing the + or - touch
controls (holding your finger on the touch
control allows you to scroll through the
numbers rapidly).
Example: 12:30
Press the
SSTTAARRTT
touch control to validate.
The time display no longer flashes (fig.2).
- To reset the time on the clock
Press and hold the touch control for a few
seconds until the display is flashing (fig.1),
then release.
Audible beeps indicate that it is now possible
to set the time.
Adjust the clock setting with the + and -
touch controls (fig.2).
Press the
SSTTAARRTT
touch control to validate.
To Next Page
