Use
16
Minute minder timer
The minute minder timer can be activated at
any time.
1. Press . The display shows the digits
and the indicator light
flashing between the hours and the
minutes.
2. Use the or key to set the required
minutes.
3. Wait approx. 5 seconds without pressing
any key to finish setting the minute
minder. The current time and the symbols
and appear on the display.
Adjusting the buzzer volume
The buzzer volume can be set to 3 different
levels. When the buzzer is in operation,
press to change the setting.
Deleting the set data
Press the and keys at the same time
to reset the programs set.
Then switch off the oven manually if cooking
is in progress.
3.7 “Touch” Programmer clock (on
some models only)
1 Decrease key
2 Menu key
3 Increase key
Setting the time
On the first use, or after a power failure, the
digits and symbol will be
flashing on the appliance's display.
1. Hold the menu key down for around
2 seconds. The dot between the hours
and the minutes will start flashing.
2. The time can be set using or .
Keep the key pressed in to increase or
decrease rapidly. The time set will be
stored after around 7 seconds from the
last modification.
3. If you need to make further changes to
the current time, hold the and
keys down for around 2 seconds. When
the dot between the hours and the
minutes starts flashing, it is possible to
change the current time.
The minute minder timer does not
stop the cooking operation but
rather informs the user when the set
time has run out.
It is not possible to set a cooking
time of more than 24 hours.
After the minute minder timer has
been programmed, the display will
go back to showing the current
time. To display the remaining time,
press .
To Next Page
Loading...
Need help?
General
