Installation
29
EN
Fastening to the structure
To fasten the appliance to the structure:
1. Open the appliance door
2. Unscrew the trim bar on the top of the
appliance.
3. Remove the top trim bar.
4. Fasten the appliance to the supporting
structure (cupboard carcass), using the
four supplied screws in the holes
indicated.
5. Refit the top trim bar using the 4
previously removed screws.
Appliance overall dimensions (mm)
Heat production during appliance
operation
Risk of fire
• Check that the piece of furniture material
is heat resistant.
• Check that the piece of furniture has the
required slots.
To Next Page
Loading...
Need help?
General
