EasyManua.ls Logo

Smeg SHC520X - Maintenance

Smeg SHC520X
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
8
8
MAINTENANCE
Opening Panel
Open the Panel by pulling it.
Clean the outside with a damp cloth and neutral detergent.
Clean the inside using a damp cloth and neutral detergent; do
not use wet cloths or sponges, or jets of water; do not use
abrasive substances.
Metal grease filters
These can also be washed in the dishwasher, and need to be
cleaned when all the command LEDs light up in a continuous
manner or at least once every 2 months use, or more frequently if
use is particularly intensive.
Resetting the alarm signal
• Press button T1 (see the paragraph on Use).
Cleaning the Filters
Pull the Comfort Panels to open them.
Remove the Filters one at a time, pushing them towards the
back of the unit and at the same time pulling downward.
Wash the Filters without bending them, and leave them to dry
completely before replacing.
Replace, taking care to ensure that the handle faces forwards
Close the comfort panels.

Related product manuals