Use
42
Setting the hob power limit
1. Before setting the power limit, turn off all
cooking zones.
2. Hold down all 4 zone selection keys
for at least 3
seconds. The appliance will beep. The
hob display will show the current power
limit (7.4 kW).
3. Press the and keys to adjust the
power limit to the required level (3.0 kW
or 4.5 kW).
4. Within 60 seconds, hold down all 4
zone selection keys
again for at least 3 seconds. The
appliance will beep again to confirm the
setting has been applied.
Examples of possible combinations
based on the set power
This function allows you to set the
power limit for your appliance.
The appliance is factory set to a
power of 7.4 kW.
Setting of the power level must be
performed within 2 minutes of
connection to the mains power
supply.
Power
(kW)
Plate
200 LH
Plate
150 LH
Plate
200 RH
Plate
150 LH
7.4
P7P7
9P9P
4.5 8888
3.0
8080
0P0P
7808
0878
To Next Page
Loading...
