User instructions
14
At the end of the program the beeper
sounds briefly and the lights of programs
no. 4 and 5 (marked "end") flash.
To switch off the dishwasher, open the door and press the
After 5 minutes of inactivity (wash cycle completed, stopped or set but
not started), the dishwasher switches to standby mode to reduce energy
consumption.
In this mode, the dishwasher indicator panel (lights or display depending
on model) functions more slowly (
At the end of the wash program, wait at least 20 minutes before removing
the dishes, to allow them to cool. To ensure that any drops of water left in
the top basket do not drip onto the dishes still in the bottom basket, you
empty the bottom basket first
To Next Page
Loading...
