Smeg STA4515 - Page 4

User instructions
4
S
WITCHING ON, S
ETTING THE WASHING PROGRAM AND
STARTING THE PROGRAM
 Press the ON/OFF button (1); the PROGRAM INDICATOR LIGHT
(2) will come on;
 Keep pressing the PROGRAM SELECTION button (3) until the
indicator light for the required program lights up;
 Select the required option (if any, depending on models);
 Close the door and after about 2" the program will start; while it is
running, the corresponding LIGHT will flash (program running
indicator
).
PROGRAM IN PROGRESS INDICATOR LIGHT
(on some models only)
When a program is running, a flashing light is projected onto the floor
under the right-hand corner of the door. At the end of the program, the
light goes out to reduce stand-by electricity consumption.