User instructions
26
EN
5. Cleaning and maintenance
Before carrying out any work, always disconnect the appliance from
the electrical power supply.
5.1 General warnings and recommendations
Avoid the use of acidic or abrasive detergents.
Clean the outer surfaces and door-lining of the dishwasher regularly using a
soft cloth moistened with water or with a normal detergent suitable for painted
surfaces. Clean the door gaskets with a damp sponge. Periodically (once or
twice a year) it is advisable to clean the tank and gaskets, using a soft cloth
and water to remove any deposits.
CLEANING THE WATER INTAKE FILTER
The water intake fi lter A located at the outlet of the water supply tap needs
to be cleaned periodically.
After having closed the water supply tap, unscrew the end of the water
intake hose, remove the fi lter A and clean it delicately under running water.
Reassemble fi lter A in its seat and carefully screw the water intake hose
back into position.
CLEANING THE SPRAY ARMS
The spray arms can be easily removed for periodic cleaning of the nozzles,
to prevent possible clogging. Wash them under running water and carefully
replace them in their seats, checking that their rotary movement is in no
way impeded.
• To remove the orbital spray arm assembly, take hold of the longer arm and
pull the orbital unit upward. Wash the arms under a jet of running water and
return them carefully to their seat.
After reassembly, check that the spray arms turn freely.
Otherwise, check that they have been installed correctly.
To Next Page
