Smeg SUK91 - User Manual

To Next Page

Thank you for ordering your new Smeg cooker from John Lewis. In doing so you have qualied for

a free of charge delivery and connection service, including disconnection and disposal of your old

cooker.

Smeg will provide a ‘hook up’ service to connect your new cooker to both the natural gas and/

or electrical supply (please note Smeg will not undertake disconnection or connection to LPG). This

connection service is provided on the understanding that existing fuel supplies have been prepared

to a required standard and fall within the parameters laid out in following information.

Once your order has been processed Smeg logistics will get in touch with you to arrange a home

delivery booking. When a date is agreed they will also give you a follow up call the day before

delivery to update you with a 4hr window. You can also choose to have a call one hour prior to

delivery on the actual day, should you wish.

To ensure everything runs smoothly, when making the booking Smeg will carry out a home delivery

questionnaire to ascertain all information relating to both access at your property & the electrical /

gas supply.

DISCONNECTION: Please note our team can only disconnect gas from a standard bayonet tting.

Please ensure any cooker for removal is cooled down prior to team arriving.

GAS CONNECTION: Your cooker will be supplied with a one metre long mark 2 BS bayonet hose

with a 1/2” BSP male tting. Which will be used to connect your cooker to the gas supply.

ELECTRICAL CONNECTION: Please visit www.smeguk.com for information on the electrical loading

requirement for your appliance. Your cooker will be supplied with the appropriate cable to connect

to the electrical supply.

IMPORTANT

Please note this is a delivery, disconnection, disposal and connection service only. The Smeg

engineer will only connect the gas and electric supply. All pipe and cable supply work must be in

place prior to connection, any remedial work required will not be undertaken and the engineer will

not be able to complete connection. Please ensure you refer to the attached connection guide specic

to your model.

SMEG COOKERS

DELIVERY AND CONNECTION PROCEDURE

Need help?

Do you have a question about the Smeg SUK91 and is the answer not in the manual?

Summary

Smeg Cooker Delivery and Connection Procedure Overview

Service Scope and Booking Process

Details the free delivery, connection service, and the process for arranging home delivery bookings and questionnaires.

Connection and Disconnection Guidelines

Outlines procedures for gas and electrical connections, including bayonet fittings and cable provisions.

Important Service Limitations

Clarifies that the engineer only connects existing supplies and does not perform remedial pipe or cable work.

Cooker Installation Requirements by Model

SUK;A;CPF Series Connection Points

Specifies rear view requirements for gas and electrical connection points for SUK, A, and CPF cooker models.

TR;SYD Series Connection Points

Details rear view specifications for gas and electrical connections for TR and SYD series cooker models.

TR103;TR1031 Series Connection Points

Outlines rear view requirements for gas and electrical supply points for TR103 and TR1031 cooker models.

Hot Zone Preparation

Advises ensuring the area above the cooker/hob is clear of flammable items before installation.

Summary

Smeg Cooker Delivery and Connection Procedure Overview

Service Scope and Booking Process

Details the free delivery, connection service, and the process for arranging home delivery bookings and questionnaires.

Connection and Disconnection Guidelines

Outlines procedures for gas and electrical connections, including bayonet fittings and cable provisions.

Important Service Limitations

Clarifies that the engineer only connects existing supplies and does not perform remedial pipe or cable work.

Cooker Installation Requirements by Model

SUK;A;CPF Series Connection Points

Specifies rear view requirements for gas and electrical connection points for SUK, A, and CPF cooker models.

TR;SYD Series Connection Points

Details rear view specifications for gas and electrical connections for TR and SYD series cooker models.

TR103;TR1031 Series Connection Points

Outlines rear view requirements for gas and electrical supply points for TR103 and TR1031 cooker models.

Hot Zone Preparation

Advises ensuring the area above the cooker/hob is clear of flammable items before installation.

This document outlines the delivery and connection procedure for Smeg cookers purchased from John Lewis, emphasizing a complimentary delivery and connection service, which includes the disconnection and disposal of your old cooker. The service is designed to be comprehensive, ensuring a smooth transition to your new appliance, provided certain pre-installation conditions are met.

Function Description

The core function of this service is to facilitate the installation of your new Smeg cooker by connecting it to your existing natural gas and/or electrical supply. This "hook up" service is offered on the understanding that your home's fuel supplies are prepared to a required standard and fall within the specified parameters. It's important to note that the service does not cover disconnection or connection to LPG (Liquefied Petroleum Gas). The Smeg logistics team will coordinate with you to arrange a home delivery booking, including a follow-up call the day before delivery to provide a 4-hour window, and an optional call one hour prior to arrival on the delivery day. This structured approach aims to minimize inconvenience and ensure you are well-informed about the delivery schedule.

Before the delivery, Smeg will conduct a home delivery questionnaire. This crucial step is designed to gather all necessary information regarding access to your property and the specifics of your electrical and gas supply. This proactive measure helps identify potential issues in advance, allowing for a smoother installation process on the day of delivery.

Usage Features

The service offers several key usage features that enhance the customer experience:

Free Delivery and Connection: As a customer who has ordered a new Smeg cooker from John Lewis, you are entitled to a free delivery and connection service. This includes the disconnection and disposal of your old cooker, saving you time and effort in arranging these separate services.
Disconnection of Old Cooker: The Smeg team is equipped to disconnect gas from a standard bayonet fitting. To ensure safety and efficiency, it is essential that any cooker intended for removal is cooled down prior to the team's arrival. This prevents any potential hazards during the disconnection process.
Gas Connection: Your new cooker will be supplied with a one-meter-long Mark 2 BS bayonet hose, featuring a 1/2" BSP male fitting. This hose is specifically designed for connecting your cooker to the gas supply, ensuring a secure and compliant connection.
Electrical Connection: The cooker will also come with the appropriate cable for connecting to the electrical supply. For detailed information on the electrical loading requirements for your specific appliance, you are directed to visit www.smeguk.com. This ensures that your electrical setup is compatible with the new cooker's demands.
Pre-installation Guidance: The document provides detailed diagrams and specifications for gas and electrical connection points for various Smeg cooker models, including SUK91/SUK92/A1/A2/A3/A4/A5/CPF9GP/CPF9IP, TR4110/TR93/TR90*/SYD4110/SY93, and TR103/TR103I. These diagrams illustrate the required positioning of the gas bayonet fitting and electrical connection points relative to the cooker's rear. For instance, for models like SUK91, the gas bayonet fitting must terminate to the left-hand side of the cooker when viewed from the rear, within 100mm from the edge of the left-hand side, and not directly behind the appliance. It must also be within a height range of 600mm to 700mm from the floor. Similar precise instructions are provided for other models, ensuring that your home's setup can accommodate the new appliance correctly.
Hot Zone Awareness: A critical usage feature is the emphasis on the "Hot Zone," which is the area directly above your cooker or hob. Before installation, it is imperative to ensure this area is free from flammable items such as wood, wallpaper, plug sockets, wiring, or an overhanging boiler. If the hot zone is not clear upon the team's arrival, they may not be able to complete the connection, highlighting the importance of pre-installation preparation for safety and compliance.

Maintenance Features

While the document primarily focuses on delivery and connection, it implicitly touches upon maintenance through its emphasis on correct installation and preparation:

Standardized Connections: By providing specific requirements for gas and electrical connections (e.g., 15mm BSP socket elbow for gas, appropriate electrical cable), the service ensures that your cooker is installed using industry-standard fittings. This standardization simplifies future maintenance or servicing, as any qualified technician will be familiar with the components used.
Pre-emptive Issue Identification: The home delivery questionnaire serves as a maintenance feature by identifying potential issues with access or supply compatibility before the installation date. This proactive approach prevents complications during installation that could lead to future operational problems or require remedial work.
Compliance with Safety Standards: The detailed instructions for gas and electrical connection points, including height and proximity requirements, are designed to ensure compliance with safety standards. A correctly installed appliance, adhering to these guidelines, is less likely to develop issues related to improper fitting, thereby reducing the need for corrective maintenance.
Clear Disconnection Protocol: The instruction to cool down the old cooker before removal is a simple yet effective maintenance-related safety protocol. It ensures that the disconnection process is safe for the technicians and prevents any damage that could occur from handling a hot appliance.
Limitation of Service for Clarity: The document explicitly states that the Smeg engineer will only connect the gas and electric supply, and will not undertake any remedial work on pipe or cable supply. This clear boundary helps customers understand their responsibilities in preparing their home for installation, which in turn contributes to the long-term reliability and proper functioning of the appliance. By ensuring that all pipe and cable supply work is in place prior to connection, the likelihood of future issues arising from inadequate infrastructure is minimized.

In summary, the Smeg cooker delivery and connection service is designed to be a seamless, customer-focused experience, providing comprehensive support from booking to installation. By adhering to the outlined preparation guidelines, customers can ensure a safe, efficient, and compliant installation of their new Smeg appliance.

Smeg SUK91 Specifications

General

Appliance type	Cooker
Type	Freestanding
Width	90 cm
Hob type	Gas
Number of burners	5
Oven type	Multifunction
Number of ovens	1
Energy Rating	A
Color	Stainless steel
Number of Cooking Zones	5
Grill	Yes
Defrost Function	Yes
Fuel Type	Gas
Dimensions (H x W x D)	900 mm x 900 mm x 600 mm