Installation
42
B - Class 2 subclass 1 (Built-in appliance)
C - Class 2 subclass 1 (Built-in appliance)
Positioning and levelling
Properly level the appliance on the floor to
ensure better stability.
• After making the electrical and/or gas
connections, screw or unscrew the
bottom part of the foot until the appliance
is stable and level on the floor.
The appliance must be installed by
authorised persons and according
to the regulations in force.
If the appliance is installed on a
raised platform, secure it using
suitable fastening systems. DO
NOT MODIFY THIS APPLIANCE.
Heavy appliance
Risk of damage to the appliance
• Insert the front feet first and then the rear
ones.
To Next Page
Loading...
