Smith & Nephew RENASYS EDGE - Installing a new canister

Installing a new canister
Ensure therapy is paused
orthe pump is O.
300
200
100
click
300
200
100
click
300
200
100
click
300
200
100
click
1
Push down on the pump until
you hear a click from the
release button.
4
Remove the paper tape around
thecanister tubing and release
tubing to full length.
2
Remove the caps from both quick
click connectors and push them
together until they click.
If removing a used canister, push the
canister release button and dispose of it
properly. Position the canister so thatthe
tubing is facing tothe rear of the pump
thenalign the pump over thecanister.
3
Start therapy by
pressing button.
6
300
200
100
click
300
200
100
click
5