Alarm Help Screens
CADD
®
-Solis VIP Ambulatory Infusion System
Silence
Cannot start pump
without a latched
cassette.
Acknowledge
Upstream occlusion.
Clear occlusion
between pump and
reservoir.
Stop Pump Silence
Help
Cannot start pump
without a latched
cassette.
Acknowledge
Upstream occlusion.
Clear occlusion
between pump and
reservoir.
Stop Pump Help
Alarm - Cassette Not Latched
Acknowledge Next
Latch cassette.
Alarm - Upstream Occlusion
Fully insert spike.
Stop Pump Next
Alarm - Cassette Not Latched
Acknowledge Retry Help
Call your home care
provider.
Alarm - Upstream Occlusion
Unkink tubing.
Stop Pump Next
Alarm - Upstream Occlusion
Reposition bag in pouch
Stop Pump Next
Alarm - Upstream Occlusion
Stop Pump Retry Help
Call your home care
provider.
Exit Accept Value
2,200 mL
Stopped
Taper 1:15 PM
Adult
TPN mL
PN m
'Accept Value', or press 'select' to edit
Infusion Volume 2,000 mL
Infusion Duration 12 Hrs 0 Min
Taper Up 1 Hrs 0 Min
Taper Down 1 Hrs 0 Min
The following alarms have associated help screens. Refer to steps above to navigate the help screens.
When certain alarms occur, additional information may be displayed on the screen.
The help screens describe what you can do to try to solve the problem that is causing the alarm.
Steps:
1. When an alarm occurs, press SILENCE to quiet the alarm.
2. If help screens are available for the alarm, “Help” appears above the right soft key.
To view the help screens, select HELP.
3. Follow the applicable instructions provided on the help screen. To page through all of the
available help screens, press NEXT repeatedly. Press ACKNOWLEDGE at any time to exit Help.
4. “Retry Help” appears when no additional help steps are available. To page through the help
screens again, press RETRY HELP. The alarm screen reappears as in Step 2 above. Repeat
steps 2 and 3. When the alarm clears, the help screen will no longer be displayed.
Cannot start pump without a latched cassette.
Upstream occlusion. Clear occlusion between pump and reservoir.