EasyManua.ls Logo

Smiths Medical CADD-legacy 1 User Manual

Smiths Medical CADD-legacy 1
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Rate is in
mL/24 hrs
This guide is intended to supplement
instructions on how to operate the pump supplied
by your Clinician. Perform only those procedures for
which you have received training by your Clinician.
Legacy
Patient Information
CADD-Legacy® 1
Ambulatory Infusion Pump
Model 6400
CONTINUOUS DELIVERY
10011896-001.indd 1 2/27/2018 7:08:09 PM

Other manuals for Smiths Medical CADD-legacy 1

Question and Answer IconNeed help?

Do you have a question about the Smiths Medical CADD-legacy 1 and is the answer not in the manual?

Smiths Medical CADD-legacy 1 Specifications

General IconGeneral
ManufacturerSmiths Medical
ModelCADD-Legacy 1
Therapy ModesContinuous
Reservoir Volume100 mL
Volume Range0.1 to 999.9 mL
Accuracy±5%
AlarmsOcclusion, Low Battery, Empty Reservoir, System Error
CompatibilityCADD Medication Cassette Reservoirs

Summary

Introduction to CADD-Legacy Pump

Important Warnings for CADD-Legacy Pump Use

Cautions for CADD-Legacy Pump Operation

CADD-Legacy 1 Pump Diagram and Components

Pump Display Overview

Shows information and messages on the pump's display.

AC Indicator Light Function

Indicates when the AC Adapter is powering the pump.

Description of CADD-Legacy Pump Keys

Installing New Batteries for CADD-Legacy Pump

Understanding the Main Screen

How to Start the CADD-Legacy Pump

How to Stop the CADD-Legacy Pump

Turning the CADD-Legacy Pump On and Off

Procedure for Removing the Cassette

Procedure for Attaching the Cassette

Resetting the Reservoir Volume

Priming the Tubing Using the Pump

Inserting Tubing into the Air Detector

Pump Dropped or Hit: What to Do

CADD-Legacy Pump Messages and Alarms

Air In Line Detected Alarm

Indicates air in tubing or improper air detector threading; requires air removal.

Battery Depleted Alarm

Batteries are low; replace with new AA batteries.

Battery Removed Pump won't run

Occurs if batteries were removed while running or used while depleted.

Error Alarm

Indicates a pump malfunction requiring removal from service.

High Pressure Alarm

Signifies a kink or closed clamp in the tubing causing high pressure.

Key pressed, Please release Alert

Alerts user to a key being continuously pressed.

LowBat Alarm

Indicates low battery level, pump still operational.

Motor Locked, remove all power

Occurs when batteries are depleted after AC power use.

[No message] Alarm

Indicates pump stopped due to battery removal without AC adapter.

[Screen displays current pump status] Alert

Alerts to misalignment, damage, or malfunction of the disposable or pump sensor.

No Disposable, Clamp Tubing Alarm

Indicates disposable removal, depletion, misalignment, damage, or sensor malfunction.

No Disposable, Pump won't run

Pump won't start due to missing, misaligned, or damaged disposable.

Your Clinician's Contact Information and Instructions

Notes Section

Related product manuals