In LLO
STOPPED
1
Reservoir Volume (ml)
Scroll to the volume contained
in the Medication Cassette
Reservoir. Press ENTER/CLEAR to
enter value.
Install new batteries in battery
compartment. Slide battery door closed.
Given (ml)
Displays total amount of medication
delivered since last cleared.
Press ENTER/CLEAR to clear value.
4
5
2
6
Upstream Sensor (status only)
Verify setting is correct. Screen
shows whether sensor is turned On
or Off. To change setting, see BIOMED
FUNCTIONS.
3
Continuous Rate (ml/24hrs)
Select the infusion rate. Press
ENTER/CLEAR to enter value.
Air detector (status only)
Verify setting is correct. Screen shows
whether sensor is turned On (High or
Low) or turned Off. To change setting, see
BIOMED FUNCTIONS.
CADD-Legacy
®
1 Pump
Model 6400
Training Guide
WARNING: This pump delivers medication at a continuous rate in milliliters per 24 hours (ml/24hrs).
Programming the pump at a delivery rate other than what is prescribed will cause over- or under-delivery of medication.
SCROLLING
Use the up and
down arrow keys
to increase or
decrease the value
on the screen.
Rate is in
ml/24hrs
IN19874.indd 2 28-10-11 14:32
To Next Page
Need help?
General
