Smittybilt Overlander XL - User Manual

Smittybilt Overlander XL Roof Top Tent
Installation Guide for Jeep Wrangler '07-'18 4-Door JKU
Installation Time: 1 Hour
Tools Required:
 Pliers
 Wire-Cutters
 10mm Wrench
Installation Instructions:
1. Remove tent from packaging using a box cutter (or knife), pliers and wire cutters (Figure A).
Figure A
2. Set the tent on its side with easy access to the bottom (Figure B).

Summary

Smittybilt Overlander XL Roof Top Tent Installation

Required Tools

Lists essential tools for installation: pliers, wire-cutters, and a 10mm wrench.

Unpacking and Tent Positioning

Instructions for removing the tent from packaging and placing it on its side for access.

Base and Mattress Fastening

Securing the tent's base and mattress using supplied 6mm bolts and washers.

Mounting Rail Installation

Positioning the mounting rails over the pre-drilled holes and bolts on the tent base.

Securing Mounting Rails to Tent

Tightening the tent base to the mounting rails using nuts, bolts, and self-tapping screws.

Ladder Bracket Attachment

Mounting the ladder brackets to both the ladder and the tent base using provided hardware.

Roof Rack Mounting

Securing the tent's mounting brackets to the vehicle's roof rack system.

Tent Opening Procedure

Steps to remove protective cover, undo straps, and extend ladder to unfold the tent.

Window Cover Fastening

Inserting dowel rods and running hooks through riveted holes on window cover flaps.

Smittybilt Overlander XL Specifications

General

Type	Roof Top Tent
Waterproof	Yes
Annex	Optional
Ladder Material	Aluminum
Weight Capacity	770 lbs
Mounting Type	Roof Rack Mount
Fabric	600D Polyester
Mattress	High-density Foam
Rainfly Material	420D Polyester Oxford
Base Material	Aluminum
Capacity	3-4 Persons