Smooth Fitness 5.65i User Manual (English)

Questions and Answers:

C
Courtney LeonardJul 30, 2025
What to do if my Smooth Fitness Treadmill displays error E01?
- K
  Kevin JohnsonJul 31, 2025
  The E01 error on your Smooth Fitness Treadmill can occur if the stop button is held during program setup. To resolve this, remove and replace the safety key to reset the system. Additionally, check the data cable for looseness or defects and reconnect or replace it if necessary. If the problem persists, the computer may be defective, requiring assistance from an authorized service technician.
C
Curtis WelchAug 5, 2025
What causes error code E 03 on Smooth Fitness Treadmill and how to fix it?
- J
  Jason KingAug 5, 2025
  The E 03 error on your Smooth Fitness Treadmill could be due to several reasons related to the speed sensor. First, ensure the speed sensor is correctly positioned and adjust it if needed. Also, check the speed sensor wire connection and reconnect it if it’s loose. If these steps don’t resolve the issue, the speed sensor itself might be defective and require replacement. In some cases, the controller could be defective, and you should contact an authorized service technician.
P
priscillawilsonAug 11, 2025
What does error E02 mean on my Smooth Fitness 5.65i Treadmill?
- D
  david48Aug 11, 2025
  If your Smooth Fitness Treadmill displays error E02, it could be due to a loose motor wire connection or a defective motor. Try reconnecting the motor wire. If the issue persists, you may need to contact an authorized service technician, as the motor itself might be defective.
M
Michael EstradaAug 17, 2025
What does error E05 mean on a Smooth Fitness 5.65i Treadmill?
- P
  patrick05Aug 17, 2025
  If your Smooth Fitness Treadmill displays error E05, it indicates that either the controller or the motor could be defective. In both cases, you should contact an authorized service technician for assistance.