Need help?Do you have a question about the SMSL D400 ES and is the answer not in the manual?
General| Dimensions | 225x185x43mm (WxHxD) |
|---|---|
| Weight | 1.25kg |
| THD+N | Line Out: 0.00009% (-120dB); Headphone Amp: 0.0001% (-120dB) |
| Signal-to-Noise Ratio (SNR) | >120dB (A-weighted) |
| Input | USB, Optical, Coaxial, Bluetooth |
| Output | RCA, XLR |
| USB Compatibility | USB 2.0 |
| Bit Depth | Up to 32-bit |
| Sampling Rate (USB) | PCM 44.1 - 768kHz |
| Sampling Rate (Optical/Coaxial) | 44.1 - 192kHz |
| Bluetooth Codec Support | SBC / AAC / aptX / aptX-HD / LDAC |
| Type | DAC/Headphone Amplifier |
| Supported Sampling Rates | USB: PCM 44.1 - 768kHz; DSD 2.8224 - 22.5792MHz; Optical/Coaxial: 44.1 - 192kHz |
| SNR | >120dB (A-weighted) |
| USB Transmission | Asynchronous |
Instructions for proper installation, voltage usage, and handling.
Product information disclaimer and detailed warranty conditions.
Highlights MQA support, advanced DAC chip, and jitter reduction technologies.
Details Bluetooth, power management, and physical construction aspects.
Details input/output methods, amplitude, THD+N, dynamic range, and SNR.
Lists supported sampling rates, bit depths, and Bluetooth codecs.
Specifies power usage, unit dimensions, and weight.
Guidance on remote effectiveness, long-term storage, and battery disposal.
Explains the operation of each button on the remote control.
Specifies the type of batteries needed for the remote control.
Identifies power button, menu, knob, display, and IR receiver.
Details all connection ports including USB, Optical, Coaxial, AES/EBU, and Outputs.
Explains knob functions and Bluetooth device management procedures.
Lists all supported input and output signal types for the device.
Details the various PCM filter modes and their characteristics.
Explains the available DSD filter modes and their cutoff frequencies.
Describes the nine sound color modes for audio customization.
Controls the output interface volume adjustment functionality.
Adjusts DPLL bandwidth for optimal jitter tolerance and performance.
Defines the specific functions assigned to the FN button.
Configures the I2S interface mode for compatibility with different sources.
Configures DSD channel pin assignments for I2S input.
Allows adjustment of audio phase for correct channel output.
Configures automatic screen dimming and adjusts display brightness.
Guides on resetting Bluetooth pairing or all system settings.
Covers installation environment, voltage, self-modification, and long-term use.
Product specifications are for reference only and subject to change.
Details warranty period, purchase verification, exclusions, and repair process.
Highlights MQA, MQA-CD, DSD, and DOP format support.
Details XMOS, ESS DAC, parallel circuit, and jitter reduction technologies.
Covers IPS display, low-noise power, Hi-Res certification, and build quality.
Describes Bluetooth chip, codecs, and inclusion of remote control.
Covers input/output types, amplitude, THD+N, dynamic range, and SNR.
Details USB asynchronous transmission, OS compatibility, and Bluetooth codecs.
Lists sampling rates, bit depths for various inputs, and power consumption.
Specifies the unit's physical size and weight.
Guidance on remote effectiveness, long-term storage, and battery disposal.
Explains the operation of each button on the remote control.
Specifies the type of batteries needed for the remote control.
Identifies front panel controls: power, menu, knob, display, IR receiver.
Details all rear panel connectivity ports: USB, Optical, Coaxial, AES/EBU, Outputs.
Explains knob functions and Bluetooth device management procedures.
Lists all supported input and output signal types for the device.
Details the various PCM filter modes and their characteristics.
Explains the available DSD filter modes and their cutoff frequencies.
Describes the nine sound color modes for audio customization.
Controls the output interface volume adjustment functionality.
Adjusts DPLL bandwidth for optimal jitter tolerance and performance.
Defines the specific functions assigned to the FN button.
Configures the I2S interface mode for compatibility with different sources.
Configures DSD channel pin assignments for I2S input.
Allows adjustment of audio phase for correct channel output.
Configures automatic screen dimming and adjusts display brightness.
Guides on resetting Bluetooth pairing or all system settings.
To Next Page
