Need help?Do you have a question about the SMSL DA-6 and is the answer not in the manual?
Explains how to use the remote control functions and buttons for operation.
Describes the initial display upon startup and general status indicators.
Details the various EQ modes available, including Direct, Tone, Bass, and Rock presets.
Explains the gain control options (Low/High) and their corresponding maximum input voltages.
Outlines the three analog surround sound modes and the option to disable surround sound.
Shows the numeric representation of the current volume setting on the device.
General| Frequency Response | 20Hz - 20kHz |
|---|---|
| Input | RCA, XLR |
| Output Impedance | < 0.1Ω |
| Standby power | < 0.5W |
| Channel separation | > 80dB |
| Input Impedance | 10kΩ |
| THD+N | <0.005% (1kHz, 1W) |
| SNR | 110dB |
To Next Page
