Need help?Do you have a question about the SMSL Sanskrit 10th and is the answer not in the manual?
General| Digital Inputs | USB, Optical, Coaxial |
|---|---|
| USB Transmission | Asynchronous |
| Type | DAC |
| Analog Outputs | RCA |
| THD+N | 0.0005% |
| Signal-to-Noise Ratio | 120dB |
| Bit Depth | Up to 32-bit |
| Supported Sampling Rates | 44.1kHz - 384kHz |
| Standby Power | <0.1W |
| Power Supply | DC5V |
Use only the specified voltage; higher voltages are dangerous and void warranty.
Do not attempt self-repair; contact qualified service personnel for any issues.
Unplug the unit during lightning storms or power surges for protection.
Supports USB, Optical, and Coaxial inputs.
Specifies the output level as 2.2Vrms.
Total Harmonic Distortion plus Noise is an exceptional 0.0002%.
Offers a wide dynamic range of 118dB.
Features a high Signal-to-Noise Ratio (SNR) of 120dB.
Compatible with Windows 7/8/8.1/10, Mac OS X10.6+, and Linux.
Supports bit depths from 1bit to 32bit for USB, 16bit to 24bit for Optical/Coaxial.
Supports PCM up to 768kHz and DSD up to 22.5792MHz via USB.
Low power consumption of 2W during operation.
Minimal standby power consumption of less than 0.1W.
Compact size of 75x45x144 mm (WxHxD).
Step-by-step guide to calibrate the gravity sensor if needed.
To Next Page
