Need help?Do you have a question about the SMSL SP400 and is the answer not in the manual?
General| Input Impedance | 10kΩ |
|---|---|
| Output Impedance | < 0.1Ω |
| Type | Headphone Amplifier |
| Frequency Response | 20Hz - 20kHz |
| Input | XLR, RCA |
| Output | XLR |
| Power Supply | AC 100-240V |
Covers safe installation environment, correct voltage usage, and avoiding self-modification.
Details warranty period, purchase date proof, excluded damages, and regional policy references.
Highlights THXAAA-888 circuit, output power ratings for different impedances, and frequency response.
Covers ultra-compact design, pop-less relays, volume control, gain control, and LCD display.
Details balanced outputs, line inputs, pre-amplifier application, and comprehensive protection systems.
Lists inputs, outputs, SNR, noise, THD+N, THD, impedance, and frequency response.
Specifies output power for balanced and unbalanced headphone outputs across various impedances.
Covers power supply voltage, consumption, standby power, unit dimensions, and weight.
Instructions for inserting batteries and optimal usage distance/placement for the remote.
Advice on signal issues, environmental interference, and the first-time operation sequence.
Labels and identifies the knob, display, headphone jacks, and remote window on the front panel.
Labels and identifies AC input, XLR input, balanced/analog outputs, and RCA input on the rear panel.
Explains the indicators for input mode, gain level, and volume on the main screen.
Details the 5-page settings menu and how to select input sources (Balanced/Unbalanced).
Explains gain adjustment options (Low, Middle, High) and volume control modes.
Describes volume control modes (ENABLE/DISABLE) and brightness level settings.
Instructions on how to restore the unit to its default factory settings.
To Next Page
