Need help?Do you have a question about the SMSL SP200 and is the answer not in the manual?
Features the THXAAA-888 headphone amplifier circuit, certified and authorized by THX.
Compact form factor, ideal for desktop audio systems.
Employs a classic retro-style toggle switch for user operation.
Provides a balanced stereo headphone output connection.
Offers a balanced stereo line input for audio sources.
Utilizes high-precision resistors for stable performance across temperature variations.
Incorporates high-quality relays for a pop-less audio experience.
Features a carefully selected, high-precision volume potentiometer for low distortion.
Delivers 6W into 16 Ohm and 3W into 32 Ohm headphones with minimal distortion.
Achieves a broad frequency response from 0.1 Hz to 500 kHz (-3dB).
Offers gain control with two selectable positions (Low/High).
Includes full protection against DC, over-voltage, over-current, short-circuit, and thermal issues.
Features an efficient power supply designed for ultra-low noise operation.
Detailed audio parameters including inputs, outputs, power, SNR, noise, THD, impedance, frequency response, and gain.
General specifications covering power supply, consumption, standby power, size, packing size, and weight.
Port for connecting balanced headphones.
Standard 6.35mm (1/4 inch) headphone output port.
An LED indicator showing the power status.
Main switch to turn the device on or off.
Switch to select between different audio input sources.
Switch to adjust the gain level for headphone output.
Rotary knob for adjusting the audio output volume.
Input port for unbalanced RCA audio signals.
Connector for the AC power cable.
Input port for balanced XLR audio signals.
To Next Page
General
