Need help?Do you have a question about the SMSL SA300 and is the answer not in the manual?
General| Output Power | 80W x 2 (4Ω), 40W x 2 (8Ω) |
|---|---|
| Signal-to-Noise Ratio | 90dB |
| Channel Separation | 88dB |
| Input Impedance | 22kΩ |
| Bluetooth Version | 5.0 |
| USB Transmission | Asynchronous |
| Standby Power | <0.5W |
| Bluetooth Codecs | SBC, AAC, aptX |
| Inputs | USB, Bluetooth |
| Output | Speaker Output |
| USB Compatibility | Windows, Mac, Linux |
| Bit Depth | 24bit |
| Power Supply | 24V |
Use only the specified voltage. Using higher voltage is dangerous and may cause fire or damage.
Do not attempt self-modification or repair. Contact qualified SMSL service personnel.
Disconnect the power cable when not in use or during lightning storms to prevent damage.
Lists input types (USB, RCA, BT), THD+N (0.008%), SNR (90dB), and channel separation (88dB).
Details output power (80Wx2/40Wx2), power consumption (35W), and standby power (<0.5W).
Features Infineon SiC DAC chip and NJRC NJW1194 volume control chip for high quality and low distortion.
Supports 32-bit 384kHz USB audio input (driver-free) and connects to active subwoofers for 2.1 systems.
Instructs to turn on Bluetooth, search for 'SMSL BT5.0A', and reconnect if pairing fails after clearing previous devices.
Describes how to clear paired Bluetooth devices using the 'Turn to Clear' option.
To Next Page
