13
terminal may short-circuit each other or be short-circuited
by conductive materials. When power tool is not in use,
keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make
a connection from one charging terminal to another.
c) Do not expose power tool to heat or fire. Avoid storage in
direct sunlight.
d) Do not subject power tool to mechanical shock.
e) In the event of battery leaking, do not allow the liquid
to come into contact with the skin or eyes. If contact has
been made, wash the affected area with copious amounts
of water and seek medical advice.
f) Seek medical advice immediately if a cell has been
swallowed.
g) Keep power tool clean and dry.
h) Wipe the charging terminals with a clean dry cloth if they
become dirty.
i) Power tool needs to be charged before use. Always refer
to this instruction and use the correct charging procedure.
j) Do not maintain power tool on charge when not in use.
k) After extended periods of storage, it may be necessary
to charge and discharge the power tool several times to
obtain maximum performance.
l) Recharge only with the charger specified by manufacture.
Do not use any charger other than that specifically
provided for use with the equipment.
m) Keep power tool out of the reach of children.
n) Retain the original product literature for future reference.
o) Dispose of properly.
To Next Page
Loading...