Snap Fresh EC0601 - Safety Warnings for Battery Cells Inside the Tool

12
d) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may cause
e) Do not use a battery pack or tool that is damaged or
modified.
Damaged or modified batteries may exhibit
f) Do not expose a battery pack or tool to fire or excessive
temperature.
Exposure to fire or temperature above 130 °C
g) Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions.
Charging improperly or at
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will
b) Never service damaged battery packs. Service of battery
Safety warnings for battery cells inside the tool
a) Do not dismantle, open or shred cells.
b) Do not short-circuit charging terminal. Do not store power
tool haphazardly in a box or drawer where charging
terminals together may cause burns or a fire.
irritation or burns.
unpredictable behaviour resulting in fire, explosion or risk of
injury.
may cause explosion.
temperatures outside the specified range may damage the
battery and increase the risk of fire.
ensure that the safety of the power tool is maintained.
packs should only be per
formed by the manufacturer or
authorized service providers.