9
c) Do not expose power tools to rain or wet conditions.
Water
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for
f)
If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply.
Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power
tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication.
A moment of inattention while operating
b) Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask, nonskid
c) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool.
d) Remove any adjusting key or wrench before turning the
power tool on.
A wrench or a key left attached to a rotating
grounded.
entering a power tool will increase the risk of electric shock.
entangled cords increase the risk of electric shock.
outdoor use reduces the risk of electric shock.
power tools may result in serious personal inju
ry.
safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Carrying power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
To Next Page
Loading...