16
Battery Type Selection
This function will allow user to configure the battery discharge thresholds for the type of battery used.
1. From Settings menu, use UP /DOWN buttons to highlight BATTERY TYPE selection then press
ENTER button.
2. BATTERY TYPE screen is displayed.
3. Use UP /DOWN buttons to select the type of battery being used.
4. Press ENTER button to accept selection and exit to Settings menu.
Note: Wrench is configured for Lithium battery shipped from factory. If Lithium battery is replaced
with Alkaline or NiMH, battery type should be changed so battery level icon and LOW battery
warnings function optimally. Battery life (REPLACE) will not be impacted, however 50% and Low
will be optimized to show most accurate linear discharge time.
To Next Page
Loading...
Need help?
General
