Snap-On BK7000 - Assembling the Charger

28
AssemblingtheCharger

The cha rger is supplied with a selection of power outlet adaptors for use in multiple
countries.Beforefirstuse,selecttheappropriateadaptorforyourcountryandattachit
byaligningthemalenotchesonthebackoftheadapterwiththefemalenotchesonthe
powerblockthentwistclockwise,
theadapterwillclickandlockintoplace.Toswitch
adapter,pushandholddownonthelockingtap,locatedonthepowerblock,andtwist
counterclockwisetorelease/open,seeFigure2.



Figure2:Assemble/DisassembleCharger
Lock