Snap-On BK8500 - User Manual

Connecting your BK8500 directly to a Windows computer using a
Point to Point ( Ad-hoc) connection :
Windows App@
Bkupgrade.com
Step #1
1. Go to www.bkupgrade.com and download, then in stall the Windows
App onto your tablet or PC
.
Step #2
.
.
1. Turn on your handle
2. Turn off your display unit
Step #3
1. Open the ne twork connections on your computer, and follow
the directions to create a new connection.
2. Select your BK8500 handle from the network list, and connect
Step #4
1. Start the Windows App
2. Select the Wi-Fi button
3. Click the “Search Point to Point”
4. Double click the handle once it appears as a found cam era

Summary

Connecting BK8500 to Windows via Point-to-Point

Download and Install Windows App

Download and install the Windows App from bkupgrade.com onto your computer.

Prepare BK8500 Hardware

Turn on the BK8500 handle and turn off the display unit.

Establish Network Connection

Open computer network connections, create a new connection, and select the BK8500 handle.

Connect Using Windows App

Launch the app, select Wi-Fi, search for the point-to-point connection, and select the camera.

Troubleshooting BK8500 Connection Problems

Manually Set IP Address

Manually enter IP address by accessing network adapter properties and TCP/IPv4 settings.

Allow BK8500 App Through Firewall

Ensure Windows firewall settings permit communication for the Snap-on BK8500 App.

Snap-On BK8500 Specifications

General

Channels	2
Test Modes	Auto, Normal, Single
Display	LCD
Type	Oscilloscope
Battery Types	Rechargeable Li-ion
Sampling Rate	1 GSa/s